Waterproof Luxury Vinyl Tiles Plastic PVC Plank SPC Flooring

Product Description

Waterproof Luxury Vinyl Tiles Plastic PVC Plank SPC Flooring

Advantages:

1)Waterproof and Dampproof
As the main component of SPC is stone powder, so it performs well with water, and mildew will not happen with high humidity.

2)Fire Retardant
According to the authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce toxic of harmful gases.

3)No Formaldehyde
SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal.

4)No Heavy Metal, No Lead Salt
The Stabilizer of SPC is Calcium zinc, no lead salt heavy metal.

5) Dimensionally Stable
Exposed to 80° heat, 6 hours---Shrinkage ≤ 0.1%; Curling ≤ 0.2mm

6) High Abrasion
SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns.

7) Superfine Anti-sliping
SPC flooring has special skid resistance and wear-resisting layer of the floor. Compared with common floor,SPC flooring has higher friction when it's wet.

8) Low requirement of subfloor
Compared to traditional LVT, SPC flooring has a distinct advantage because it is rigid core, which can hide many imperfections of subfloo

Product Description:

1.The main raw material of SPC flooring is PVC, PVC is an environmentally friendly non-toxic renewable resource. It has been used in daily life, such as tableware, medical infusion bags and so on, so there is no need to worry about environmental protection. The main component of the SPC floor is natural stone powder, which is tested by the national authoritative department and does not contain any radioactive elements. It is a new type of eco-friendly flooring material. Any qualified SPC floor requires IS09000 international quality system certification and ISO14001 international green certification, up to EN14372, EN649-2011, IEC62321, GB4085-83 standards.

2.SPC flooring is recyclable, greatly saving wood usage. This is consistent with the national policy of sustainable development for the benefit of society.

3.The SPC floor has a thickness of 3.5mm to 6mm, which has unparalleled advantages for building load-bearing and space saving in high-rise buildings. At the same time,it has a special advantage in Redecoration and renovation.

4.There is a special high-tech transparent wear layer on SPC floor surface, its wear-resistant up to 8000rpm or more.The wear resistance of the laminate flooring is only 800-4000 rpm, which is more wear-resistant in traditional floor materials. The wear layer of the SPC floor can be used for 5-10 years depending on the thickness under normal conditions. Therefore, SPC flooring has become more and more popular in hospitals, schools, office buildings, shopping malls, supermarkets, and transportation facilities where people flow is relatively large.

5.The physical indicators of SPC flooring are stable and reliable, and chemical indicators meet international and national standards.SPC floor shrinkage: ≤ 1 ‰ (after tempering), ≤ 2.5 ‰ (before tempering), (shrinkage test: 80 °C, 6 hrs)